To Next Page

To Previous Page

221

Default level

2: Monitor level

Parameters

as-path-acl-number: Displays IPv4 MBGP routing information that matches the AS path list, which is

specified with a number from 1 to 256.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display bgp multicast routing-table as-path-acl to display IPv4 MBGP routes that match an AS path

list.

Examples

# Display IPv4 MBGP routes that match AS path list 1.

<Sysname> display bgp multicast routing-table as-path-acl 1

BGP Local router ID is 20.20.20.1

Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,

h - history, i - internal, s - suppressed, S - Stale

Origin : i - IGP, e - EGP, ? – incomplete

Network NextHop MED LocPrf PrefVal Path/Ogn

*> 40.40.40.0/24 30.30.30.1 0 0 300i

For more information about the output, see Table 50.

display bgp multicast routing-table cidr

Syntax

display bgp multicast routing-table cidr [ | { begin | exclude | include } regular-expression ]

View

Any view