342
mld timer query
Syntax
mld timer query interval
undo mld timer query
View
Interface view
Default level
2: System level
Parameters
interval: Specifies an MLD query interval, namely, the amount of time in seconds between MLD general
query messages, in the range of 1 to 18,000.
Description
Use mld timer query to configure the MLD query interval on the current interface.
Use undo mld timer query to restore the default.
By default, the MLD query interval is 125 seconds.
Related commands: display mld interface, mld timer other-querier-present, and timer query.
Examples
# Set the MLD query interval to 200 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld timer query 200
mld version
Syntax
mld version version-number
undo mld version
View
Interface view
Default level
2: System level
Parameters
version-number: MLD version, 1 or 2.
Description
Use mld version to configure the MLD version on the current interface.
Use undo mld version to restore the default MLD version.
By default, the MLD version is MLDv1.
To Next Page
Loading...
Need help?
General