HP 3600 v2 Series User Manual

103
[Sysname-igmp] max-response-time 8
# Set the maximum response time for IGMP general queries to 8 seconds globally in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] max-response-time 8
require-router-alert (IGMP view)
Syntax
require-router-alert
undo require-router-alert
View
Public network IGMP view, VPN instance IGMP view
Default level
2: System level
Parameters
None
Description
Use require-router-alert to configure the router globally to discard IGMP messages that do not carry the
Router-Alert option.
Use undo require-router-alert to restore the default.
By default, the switch does not check the Router-Alert option but passes all the IGMP messages that it
received to the upper layer protocol for processing.
Related commands: igmp require-router-alert and send-router-alert.
Examples
# Configure the router to discard IGMP messages that do not carry the Router-Alert option globally on the
public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] require-router-alert
# Configure the router to discard IGMP messages that do not carry the Router-Alert option globally in
VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] require-router-alert
reset igmp group
Syntax
reset igmp [ all-instance | vpn-instance vpn-instance-name ] group { all | interface interface-type
interface-number { all | group-address [ mask { mask | mask-length } ] [ source-address [ mask { mask
| mask-length } ] ] } }

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English