HP 3600 v2 Series User Manual

365
State-Refresh 8 7 1
BSR 3243 589 1
C-RP 53 32 0
Table 80 Command output
Field Descri
p
tion
PIM global control-message counters Statistics of IPv6 PIM global control messages
PIM control-message counters for interface
Interface for which IPv6 PIM control messages were
counted
Received Number of messages received
Sent Number of messages sent
Invalid Number of invalid messages
Register Register messages
Register-Stop Register-stop messages
Probe Null register messages
Assert Assert messages
Graft Graft messages
Graft-Ack Graft-ack messages
Hello Hello messages
Join/Prune Join/prune messages
State Refresh State refresh messages
BSR Bootstrap messages
C-RP C-RP-Adv messages
display pim ipv6 df-info
Syntax
display pim ipv6 df-info [ rp-address ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
rp-address: Specifies the RP address of IPv6 BIDIR-PIM.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English