263
Use undo max-response-time to restore the default.
By default, the maximum response delay for MLD general queries is 10 seconds.
This command takes effect only in MLD snooping-enabled VLANs.
Related commands: mld-snooping max-response-time and mld-snooping query-interval.
Examples
# Set the maximum response delay for MLD general queries to 5 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
mld-snooping
Syntax
mld-snooping
undo mld-snooping
View
System view
Default level
2: System level
Parameters
None
Description
Use mld-snooping to enable MLD snooping globally and enter MLD-snooping view.
Use undo mld-snooping to disable MLD snooping globally.
By default, MLD snooping is disabled.
Related commands: mld-snooping enable.
Examples
# Enable MLD snooping globally and enter MLD-snooping view.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping]
mld-snooping access-policy
Syntax
mld-snooping access-policy acl6-number
undo mld-snooping access-policy { acl6-number | all }
View
User profile view
To Next Page
Loading...
