HP 3600 v2 Series

273
mld-snooping host-tracking
Syntax
mld-snooping host-tracking
undo mld-snooping host-tracking
View
VLAN view
Default level
2: System level
Parameters
None
Description
Use mld-snooping host-tracking to enable the MLD snooping host tracking function in a VLAN.
Use undo mld-snooping host-tracking to disable the MLD snooping host tracking function in a VLAN.
By default, this function is disabled.
Before you configure this command, enable MLD snooping for the VLAN first.
Related commands: host-tracking, and mld-snooping enable.
Examples
# Enable MLD snooping and the MLD snooping host tracking function for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping host-tracking
mld-snooping last-listener-query-interval
Syntax
mld-snooping last-listener-query-interval interval
undo mld-snooping last-listener-query-interval
View
VLAN view
Default level
2: System level
Parameters
interval: Sets the MLD last-listener query interval in seconds. The value ranges from 1 to 5.
Description
Use mld-snooping last-listener-query-interval to set the MLD last-listener query interval for a VLAN.