230
display bgp multicast routing-table statistic
Syntax
display bgp multicast routing-table statistic [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast routing-table statistic to display IPv4 MBGP routing statistics.
Examples
# Display IPv4 MBGP routing statistics.
<Sysname> display bgp multicast routing-table statistic
Total Number of Routes: 4
filter-policy export (MBGP address family view)
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | isis process-id | ospf process-id |
rip process-id | static ]
undo filter-policy export [ direct | isis process-id | ospf process-id | rip process-id | static ]
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
acl-number: Specifies the number of an ACL used to filter outgoing routing information, ranging from
2000 to 3999.
ip-prefix-name: Specifies the name of an IP prefix list used to filter outgoing routing information, a string
of 1 to 19 characters.
direct: Filters direct routes.
To Next Page
Loading...
