286
Examples
# Remove the dynamic group entries of all MLD snooping groups.
<Sysname> reset mld-snooping group all
reset mld-snooping statistics
Syntax
reset mld-snooping statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use reset mld-snooping statistics to clear statistics for the MLD messages learned by MLD snooping.
Examples
# Clear statistics for the MLD messages learned by MLD snooping.
<Sysname> reset mld-snooping statistics
router-aging-time (MLD-snooping view)
Syntax
router-aging-time interval
undo router-aging-time
View
MLD-snooping view
Default level
2: System level
Parameters
interval: Specifies an aging timer in seconds for dynamic router ports. The value ranges from 1 to 1,000.
Description
Use router-aging-time to set the aging timer for dynamic router ports globally.
Use undo router-aging-time to restore the default.
By default, the aging time of a dynamic router port is 260 seconds.
This command takes effect only in MLD snooping-enabled VLANs.
Related commands: mld-snooping router-aging-time.
To Next Page
Loading...
Need help?
General