HP 3600 v2 Series User Manual

157
pim hello-option override-interval
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
View
Interface view
Default level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use pim hello-option override-interval to configure the prune override interval on the current interface.
Use undo pim hello-option override-interval to restore the default.
By default, the prune override interval is 2500 milliseconds.
Related commands: hello-option lan-delay, hello-option override-interval, and pim hello-option
lan-delay.
Examples
# Set the prune override interval to 2000 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option override-interval 2000
pim holdtime assert
Syntax
pim holdtime assert interval
undo pim holdtime assert
View
Interface view
Default level
2: System level
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use pim holdtime assert to configure the assert timeout time on the current interface.
Use undo pim holdtime assert to restore the default.
By default, the assert timeout time is 180 seconds.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English