HP 3600 v2 Series User Manual

138
Description
Use display pim neighbor to display the PIM neighbor information.
If neither all-instance nor vpn-instance is specified, this command displays information about all PIM
neighbors in the public network.
Examples
# Display information about all PIM neighbors in the public network.
<Sysname> display pim neighbor
VPN-Instance: public net
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires Dr-Priority Mode
10.1.1.2 Vlan1 02:50:49 00:01:31 1 B
20.1.1.2 Vlan2 02:49:39 00:01:42 1 B
# In the public network, view the detailed information of the PIM neighbor whose IP address is
11.110.0.20.
<Sysname> display pim neighbor 11.110.0.20 verbose
VPN-Instance: public net
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Bidirectional PIM: Disabled
Table 35 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
Total Number of Neighbors Total number of PIM neighbors.
Neighbor IP address of the PIM neighbor.
Interface Interface that connects to the PIM neighbor.
Uptime Length of time for which the PIM neighbor has been up, in hh:mm:ss.
Expires/Expiry time
Remaining time of the PIM neighbor, in hh:mm:ss. "Never" means that the
PIM neighbor is always up and reachable.
Dr-Priority/DR Priority Priority of the PIM neighbor.
Mode
Mode of the PIM neighbor. The value "B" means the BIDIR-PIM mode. If
nothing is displayed, it means the non-BIDIR-PIM mode.
Generation ID
Generation ID of the PIM neighbor. (A random value that indicates a status
change of the PIM neighbor.)

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English