180
Table 39 Command output
Field Descri
tion
MSDP Peer Information of
VPN-Instance: public net
Information of the MSDP peer on the public network.
MSDP Peer MSDP peer address.
AS
Number of the AS where the MSDP peer is located. A question mark
indicates that the system could not obtain the AS number.
State
MSDP peer status
• Up—The session has set up and MSDP peers are in session.
• Listen—The session has set up. The local device acts as the server and
is in listening state.
• Connect—The session has not set up. The local device acts as an
client and is in connecting state.
• Shutdown—Deactivated.
• Down—Connection failed.
Resets Number of times that the MSDP peer connection is reset.
Up/Down time Length of time since the MSDP peer connection was established/failed.
Connection interface
Interface and its IP address used for setting up a TCP connection with the
remote MSDP peer.
Number of sent/received messages Number of SA messages sent and received through this connection.
Number of discarded output
messages
Number of discarded outgoing messages.
Elapsed time since last connection
or counters clear
Time passed since the information of the MSDP peer was last cleared.
Information about (Source,
Group)-based SA filtering policy
SA message filtering list information
• Import policy—Filter list for receiving SA messages from the specified
MSDP peer.
• Export policy—Filter list for forwarding SA messages from the
specified MSDP peer.
Information about SA-Requests
SA request information
• Policy to accept SA request messages—Filtering rule for receiving or
forwarding SA messages from the specified MSDP peer.
• Sending SA requests status—Whether enabled to send an SA
request message to the designated MSDP peer after receiving a new
join message.
Minimum TTL to forward SA with
encapsulated data
Minimum TTL of multicast packet encapsulated in SA messages.
SAs learned from this peer Number of cached (S, G) entries learned from this MSDP peer.
SA-cache maximum for the peer
Maximum number of (S, G) entries learned from this MSDP peer that the
device can cache.
Input queue size Data size cached in the input queue.
Output queue size Data size cached in the output queue.
To Next Page
Loading...
