38
Use undo source-deny to disable multicast source port filtering.
By default, multicast source port filtering is not enabled.
For the HP 3600 v2 EI switches, this command takes effect in both IGMP snooping-enabled VLANs and
VLANs with IGMP enabled on their VLAN interfaces.
For the HP 3600 v2 SI switches, this command takes effect in IGMP snooping-enabled VLANs.
Examples
# Enable source port filtering for multicast data on interfaces Ethernet 1/0/1 through Ethernet 1/0/4.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] source-deny port ethernet 1/0/1 to ethernet 1/0/4
To Next Page
Loading...
