HP 8712C User Manual

I
-
I
-
Using Instrument Functions
Saving and Recalling Measurement Results
To Delete a File
1.
2.
3.
To Copy a File 1.
2.
3.
Hi$hght the iile to be deleted by using the front panel knob or the @) a
Press Delete File YES.
lb delete all files within the current directory, press Delete All Files
YES.
Highlight the file to be copied by using the front panel knob or the @) @)
keys.
Press CopF File and then select the destination disk for the file to be
copied. You will then be given the opportunity to edit the destination iile
name if you wish.
Use a keyboard (if connected) or the front panel knob and the softkeys to
enter the destination Iilename.
CAUTION
There will be no warning from the analyzer if the destination flIe already
exists. It will be overwritten without warning. For instance, STATEl. STA
on the internal memory disk and STATEl. STA on a floppy disk in the
built-in disk drive may contain completely different sets of data. If you copy
one of those hles to the other without editing the file name, the file will be
overwritten with the source hle.
4. ‘Ib copy the file press titer .
5+ To copy all the files in the current directory, press Copy All Files and
then select the destination disk for the ftles to be copied.
6. You will then be prompted to tell the analyzer where on the destination
disk to put the files to be copied.
‘7. Press Er&sr if you want the files to go into the main, or root, directory of
the destination disk. Use a keyboard (if connected) or the front panel knob
and the softkeys to enter a subdirectory on the destination disk before
pressing EritBr .
4-73
-1
I-

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English