I
-
I
-
Choose an Appropriate Calibration Method
Once you have decided that it is necessary to perform a calibration, you will
need to choose the calibration method suited to the type of measurement
you will be performing. After you have selected the type of measurement
under the @EiiFiJ or
@EFF]
key, press the
ICAL)
key. Pressing the
@
key brings up calibration choices for the type of measurement you
selected in the
[ELFi)
or
(MEAS-
menu. See
‘lhble
6-l
for the types of
calibrations available for each type of measurement. The following sections
in this chapter discuss these different types of calibrations, organized by
measurement type. There is also a discussion of a type of calibration called
normalization.
6-8
-1
To Next Page
Loading...
