HP 8712C User Manual

I
-
Getting Started
Performing the Operator’s Check
Equipment List
‘Ib perform the operator’s check you will need the following:
l A known good cable such as the one that was supplied with your analyzer.
The cable you use should have SO.5 dB of insertion loss up to 1.3 GHz
and 50.75 dB of insertion loss from 1.3 to 3.0 GHz.
l A known good load (> 40 dB return loss) that matches the test
port impedance of your analyzer such as one from calibration kit
HP 85032BE (50 Q) or HP 85036B/E (75 0).
2-14
-

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English