I
-
-
Save the Calibration
After you have performed your calibration, you will probably want to save it
for future use.
‘lb
save your calibration:
1.
Press
CSAVE
RECALL) Dsf
ine
%,VQ
!GaL
on
OFF , which will toggle the
save
cal
function to “ON.
”
2. Press
Prior
M@IXU
Sel+-t;
B&k and select where you want the
calibration saved. See “Saving and Recalling Measurement Results” in
Chapter 4 for information on the three available selections.
3. Press Prior Menu
SZUW
State
to save the calibration.
4. The analyzer will save the calibration along with the current instrument
state to a Ele on the disk you have selected.
5. Refer to “Saving and Recalling Measurement Results” in Chapter 4 for
more information on saving, renaming, and copying files.
6-25
-
-1