HP 8712C - Instrument Specifications and Characteristics; Source Specifications

I
-
I
-
Instrument Specifications and Characteristics
Specifications describe the instrument’s warranted performance over
the temperature range of 25O f 5 “C, unless otherwise stated. These
specifications are valid only after the instrument has been turned on and
allowed to warm-up for at least one hour.
Supplemental characteristics (indicated by italics) are typical, but
nonwarranted parameters, intended to provide information useful in applying
the instrument.
Source Specifications
Frequency
Range
HP 8712C
HP B714C
Resolution
StabBy
Accuncy
300 kHz to 1300 MHz
300 kHz to 3000 MHz
1 Hz
f5 ppm at 25 ‘C f5 ‘C
< 1 Hz at 10% change in he voltage
10-4