HP 8712C User Manual

I
-
Specifications and Characteristics
Instrument Specifications and Characteristics
Output Power
Reselutionl
Level Accuracy’
0.01 dB
4~1.0 dB
f1.5 dB IOption lECl*
412.0 dB IOption 1E113
413.0 dB IOptions 1EC and lEl1283
1 All power characteristics for HP 8714C analyzers with Option 1EC 175 ohm ports1 are typical above 2000 MHz.
2 75 ohm tesf ports
3 Attenuator option
Maximum Specified Test Port Power
Frequency
<to00 MHz
>lOOO MHz
HP 87121: (Std)’
+16 dBm
+ 13 dBm
HP 8714C (Std)’
+ 10 dBm
+lO dBm
1 This value till change depending upon the options installed in your analyzer. See ‘Determining Test Port Power” to determine the maximum test port power
output for your particular instrument.
Minimum Specified Test Port Power
Analyzer
Standard’
Option 1El
[Attenuator)
HP 8712C (Std) HP 8714C (Std)
0 dBm
-5 dBm
-60 dBm
-60 dBm
1 This value will change depending upon the options installed in your analyzer. See ‘Determining Test Port Power’ 10 determine the minimum test port power
output for your particular instrument.
10-5

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English