HP 8712C - Typical Measurement Uncertainty

I
-
I
-
Specifications and Characteristics
Instrument Specifications and Characteristics
Typical Measurement Uncertainty
The following graphs show typical measurement uncertainty. The
assumptions made to generate these curves were:
l For transmission uncertainty, the DUT is assumed to be well-matched.
l For reflection uncertainty, the DUT is assumed to be a one port device. (In
other words, load match errors produced when measuring transmission are
not taken into account.)
0 Power = 0 dBm for reflection measurements
0 Power = -20 dBm for transmission measurements
l For transmission measurements, an enhanced response calibration was
performed.
l For reflection measurements, a one port calibration was performed.
10-11
I-