HP 8712C User Manual

I
-
Using Instrument Functions
Connecting and Configuring Printers and Plotters
Define the Printer or Plotter Settings
You will only have to do this setup once if you make all your hardcopies with
the same printing or plotting device.
Press (HARDCOPY) and then Wfjme PBS , l&f Ena Privter , or
l&f Prke Plotter+ , depending on which type of device you are using. Note
that only one of these choices is selectable at a time.
Three procedures follow. Use “Defining a PCL5 Printer” or “Dehning a
Printer” if you are using a printer. Otherwise, go to “Defining a Plotter.”
Defining a PC15 Printer Make the following selections in the analyzer menus:
1. Press &store Defaults to restore the default parameters for a printer.
The defaults are:
Parameter
Monochrome/Color
Orientation
Auto Feed
Top Margin
Left Margin
Print Width
Default
Monochrome
Portrait
ON
0.00 mm
0.00 mm
150 mm 15.91 inl
2. Select the type of printer you have: either ?~XWX~XWW or Color .
3. Select the orientation of the paper to the information printed, either
Portrait or Landscape.
The portrait choice orientates the printout
vertically, the landscape orientates the printout horizontally.
4. If you do not want auto feed active, press Auto Feed Off .
4-85
-1
I-

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English