HP 8712C User Manual

I
-
I
-
Using Instrument Functions
Connecting and Configuring Printers and Plotters
Defining a Printer
Make the following selections in the analyzer menus:
1. Press Restrrr~l Dsf aults to restore the default parameters for a printer.
The defaults are:
Parameter
Monochrome/Color
Orientation
Auto Feed
Printer Resolution
Top Margin
Left Margin
Print Width
Default
Monochrome
Portrait
ON
96 Dots Per Inch
0.00 mm
0.00 mm
150 mm 15.91 inl
2. Select the type of printer you have: either Hanacl-kzoma or Color .
3. Select the orientation of the paper to the information printed, either
Pw%w$~; or Ladecape . The portrait choice orientates the printout
vertically, the landscape orientates the printout horizontally.
4. If you do not want auto feed active, press Auto Feed Off .
5. Press Woos Pxkxter to change the printer resolution, margins, and print
width:
a. Prir~ter R#x&alutiorx : Refer to the following table for some specilic
printers and their valid print resolutions.
4-87

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English