HP 8712C User Manual

--..
I
-
Automating Measurements
Configuring Your Test System
Network Analyzers
In this configuration, the measurement is controlled by an IBASIC program
With IBASIC Controlled running inside the analyzer. IBASIC can provide high-speed measurement
by Computer(s)
control and data collection, and save the results in program memory or on
disk. The external computer then communicates with IBASIC, and collects
the measurement results at some defined interval. This configuration can
result in higher throughput, especially if the measurement setup and control
is complex. Configure your system as an analyzer with IBASIC (Option lC2)
and an external computer if you would like to:
l Centralize automation and application programs
l Develop a more sophisticated system
l Add networking
l Add local automation capability
IBASIC PROGRAM
Y-t
PROGRAM
D.U.T
pp6lOc
Figure 7-4. Network Analyzer Running IBASIC, Controlled by a Computer
7-11
_I

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English