HP 8712C User Manual

I
-
I
-
Automating Measurements
Operator Interaction
58 Message: !
59
Strl$=“This key is programmable. ”
60
StrZ$=“To modify , select”
61
Str3$=” [System Options1 , CIBASIC~ , [Edit] . It
62
OUTPUT QHp8714;“DISP:ANN:MESS “‘tStrl$&CHR$(lO)t
Str2$&CHR$ (lO)tStr3$&” ’ , MEDIUM”
63 RETURN
64 !
65
END
NOTENOTE
For more Utter 1SEGIN programs, see the IBAX Example Progrems Disk and the HP InstrumentFor more Utter 1SEGIN programs, see the IBAX Example Progrems Disk and the HP Instrument
B4.W User’s Handbook supplement. The disk and handbook are shipped with analyzers with theB4.W User’s Handbook supplement. The disk and handbook are shipped with analyzers with the
IBASIC Option 112 IBASIC Option 112
loading a
Us& BEGIN
Program
A User $EGf# program can be automatically loaded at power up if the
program is named “AUTOST”. An “AUTOST” program is loaded at power up
from the internal non-volatile memory or from a 3.5” floppy disk inserted into
the analyzer’s 3.5” disk drive. When the USW BEGIN key is pressed, the
program will remain idle until it is needed. The program remains idle until a
softkey is pressed and code related to that softkey is executed. After the code
is executed, the program returns to idle. Refer to example programs provided
on the IBASIC programs disk for USW BEGIN example programs. Use of the
User BHGIBI does not restrict access to any normally available front panel
feature, nor does this key affect sweep update rates.
7-26
I-

HP 8712C Specifications

General

Brand	HP
Model	8712C
Category	Measuring Instruments
Language	English