HP 8712C - Page 402

I
-
I
-
[HARDKEY) I Softkey Reference
C
copy Softkey in fle utilities menu. Used to copy files.
Fj,.le See “Other File Utilities” in Chapter 4 for more information.
Access Keys: [SAVE RECALL) Fila Utilities
Copy to Softkey in copy hle menu.
Used to select the analyzer’s built-in disk drive as
3.5" Disk
the destination drive for copying of files. Displays character entry menu to
rename file (if desired) prior to copying.
Access Keys: [SAVE RECALL) Fils WL!2ti~s Copp FiLe or
&spy All Files
copy $0 Softkey in copy file menu.
Used to select the analyzer’s internal non-volatile
NonVoZ. RAM
RAM as the destination drive for copying of files. Displays character entry
menu to rename Ele (if desired) prior to copying.
Access Keys: [SAVE RECALL) Fila Utilities Copy File or
Crspy All Files
Cr>py to Softkey in copy fle menu.
Used to select the analyzer’s internal volatile RAM
Vu1 RAM
as the destination drive for copying of files. Displays character entry menu to
rename Ele (if desired) prior to copying.
Access Keys: [SAVE RECALL) Fils Utilities Copy File or
Ccpy Al1 Files
CRT Softkey in system configuration menu. Displays menu to set external CRT
position and timing parameters for best image. These settings are not affected
Adjust by
presetting the analyzer.
NOTE
These adjustments also affect the internal CRT of the analyzer.
_I