I
-
I
-
i-j
I
Softkq
Reference
Ma
Limit
Softkey
in marker limits menu. Use this key to set the maximum limit for the
marker limit function that is currently highlighted in the on-screen table.
See “lb Use Marker Limit Functions” in Chapter 4 for more information.
AccessKeys:
(EiFEFj
Limit Menu
Mkr
Limi%~~
Edi%
Limit
Olin/Maijrl
Mm
&arxc;h
Softkey
in marker search menu. Places the active marker at the frequency
point of maximum amplitude. If tracking is off, marker remains at that
frequency. If tracking is on, marker moves to the maximum point with each
sweep.
See “Using Markers” in Chapter 4 for more information.
Access Keys:
(IZGGQ
I~w%w
Ssarch
(m)
Hardkey
in
MEAS
area. Turns on measurement channel 1 as the active
channel. Default mode is transmission measurement.
(MEAS)
Hardkey
in
MEAS
area. Turns on measurement channel 2 as the active
channel. Default is measurement channel
off;
selecting it changes setting to
the most recent type of measurement, or transmission if not been used.
Meas
bast
Softkey
in annotation options menu. Allows you to toggle the measurement
ON
off
channel annotation at the top of the display on or off.
See ‘Customizing the Display” in Chapter 4 for more information.
Access Keys:
(jSiKiF]
ptars
Display
hmtatim
Opticms
Msa.s
DFF
Softkey
in
(MEAS]
or
(j]
menu. Turns the active measurement channel
Off.
9-48
I-
To Next Page
Loading...
