I
-
I
-
(jj)
I
Softkey Reference
P
print
Softkey
in more printer menu. Sets print width (printing space) in mm.
Width
See ‘“‘Connecting and
Conhguring
Printers and Plotters” in Chapter 4 for more
information.
I)ri;ntfplat
Softkey
in select copy port menu. Sets recognized
HP-h3
address of hardcopy
HP-II3
Addr
device at HP-IB port, for
HP-h3
printers and plotters only. The default address
is 5. The “recognized HP-IB address” is the address that the network analyzer
uses to communicate with the device. The actual address of the device must
be set independently to match.
See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more
information.
Access Keys:
(-1
Sslect
Copy
Port
printer
Softkey
in more printer menu. Sets printer resolution in terms of dots per
inch. Check printer manual for appropriate setting. Default is 96 dots per
Resolution
inch
See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more
information on printer resolution.
Access Keys:
(HARD-1
Dsf
izLe
Printer
Moire
Printer
progra;ms
(Option
ICZ,
BASIC,
on&)
Softkey
in (SAVE RECALL) menu. Displays menu to
save, re-save, recall programs, or save a program as an autostart (AUTOST)
program.
See the HP Instrument
BASIC
User’s Handbook for more information.
Pwr
Level
Softkey
in @VE@ menu. Allows you to set a power level (other than the
factory default of 0
dBm)
that the analyzer will always return to when the
at
Pxeset
[-]
k
y’
p
PRESET
e
1s
ressed.
Be sure to terminate your entry with one of the
softkeys
or the
[ENTERI)
key.
9-61
To Next Page
Loading...
