I
-
I
-
L-1
I
Softksp
Reference
Recall
Pragram
Rwa13.
state
Reference
Pasitian
Refamnce
Tracking
R8fZ,
hrt
Ektsnsian
(Option 1
C2,
ZBASIC,
on&)
Softkey
in
IBASIC
edit menu.
Access Keys:
CSYSTEM
OPTIONS)
IBASIC
Edit
(Option 1
c2,
BASIC,
on&)
Softkey
in programs menu. Recalls to the network
analyzer a program from internal memory, internal disk, or external disk.
See the HP Instrument
BASIC
User’s Handbook for more information.
Access Keys: (SAVE
RECALL)
Ikogxww
Softkey
in [SAVE RECALL) menu. Recalls instrument state files (not plot
files)
from internal memory, internal disk, or external disk.
See “Saving and Recalling Measurement Results” in Chapter 4 for more
information.
Softkey
in
[SCALE)
menu. Sets the value of the reference line. The reference
value is noted on the screen as “Ref”.
Softkey
in
@ZYZ)
menu. Sets the position of the reference line from the
top of the graticule (10) to the bottom (0) or in between. Default position is
middle (5).
See Figure 2-3 in Chapter 2.
Softkey
in
($Z?J
menu. Allows you to track either a certain frequency or
the peak point of the measurement trace by scaling the trace such that the
point of interest always falls on the display reference line.
See “Using Reference Tracking” in Chapter 4 for more information.
Softkey
in more cal menu. Allows compensation for phase shift due to an
extended measurement reference plane on the REFLECTION RF OUT port.
See “Reference Plane and Port Extensions” in Chapter 5 for more
information.
Access Keys:
m
MOB
Cal
9-64
To Next Page
Loading...
