I
-
I
-
Traas
Port
Softkey
in more cal menu. Allows compensation for phase shift due to an
Extansion
extended measurement reference plane on the TRANSMISSION RF IN port.
See “Reference Plane and Port Extensions” in Chapter 5 for more
information.
Access Keys:
m
More
rCal
Transmissn
Softkey
in amplifier,
filter,
broadband passive, and measurement menus.
Selects ratioed forward transmission type of measurement.
See “Measuring Transmission Response” in Chapter 3 for more information.
Transmissn
Softkey
in the cal check menu. One of the corrected measurement
Tracking
uncertainties that can be viewed after performing a cal check.
Refer to Chapter 6 for more information on using cal check.
Access Keys:
ICAL)
&l
Chgck
Vies
Cal
GhecB
Trigger
Softkey
in source (MENU). Displays menu with choices for triggering the
analyzer. The analyzer can be triggered continuously (default setting) or once.
It can be triggered internally (default setting), externally, or externally one
frequency point at a time.
Trigger
Softkey
in trigger menu.
Displays menu for choice of internal or external
Source
triggering.
Access Keys:
(mj
T~fgger
TSet
Cal
Softkey
in the
dehne
save menu. For use with a multiport test set.
on
OFF
Refer to the multiport test set User’s
and
Seruice
Guide for more information.
Access Keys: [SAVE RECALL)
Ddfm
SEWS
9-84
I-
To Next Page
Loading...
