123
Syntax
reset dhcp snooping binding { all | ip ip-address [ vlan vlan-id ] }
Views
User view
Predefined user roles
network-admin
Parameters
all: Clears all DHCP snooping entries.
ip ip-address: Clears the DHCP snooping entry for the specified IP address.
vlan vlan-id: Clears DHCP snooping entries for the specified VLAN. If you do not specify a VLAN,
this command clears DHCP snooping entries for the default VLAN.
Examples
# Clear all DHCP snooping entries.
<Sysname> reset dhcp snooping binding all
Related commands
display dhcp snooping binding
reset dhcp snooping packet statistics
Use reset dhcp snooping packet statistics to clear DHCP packet statistics for DHCP snooping.
Syntax
reset dhcp snooping packet statistics [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears DHCP packet statistics for the master device.
Examples
# Clear DHCP packet statistics for DHCP snooping.
<Sysname> reset dhcp snooping packet statistics
Related commands
display dhcp snooping packet statistics
BOOTP client commands
display bootp client
Use display bootp client to display information about a BOOTP client.
To Next Page
Loading...
Need help?
General