EasyManua.ls Logo

HPE FlexFabric 5950 Series

HPE FlexFabric 5950 Series
363 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
207
Filed Description
• ADDRESS—Generated by a manually configured address.
Age Aging time in seconds. If the prefix does not age out, this field displays a hyphen (-).
Flag
Flags carried in RA messages. If no flags are available, this field displays a hyphen (-).
• L—The address with the prefix is directly reachable on the link.
• A—The prefix is used for stateless autoconfiguration.
• N—The prefix is not advertised in RA messages.
Lifetime
Lifetime in seconds advertised in RA messages. If the prefix does not need to be
advertised, this field displays a hyphen (-).
• Valid—Valid lifetime of the prefix.
• Preferred—Preferred lifetime of the prefix.
Related commands
ipv6 nd ra prefix
display ipv6 neighbors
Use display ipv6 neighbors to display IPv6 neighbor information.
Syntax
display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Specifies the IPv6 address of a neighbor whose information is displayed.
all: Displays information about all neighbors, including neighbors acquired dynamically and
configured statically on the public network and all private networks.
dynamic: Displays information about all neighbors acquired dynamically.
static: Displays information about all neighbors configured statically.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 neighbor information for all member devices.
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Displays information about neighbors in the specified VLAN. The value range for VLAN
ID is 1 to 4094.
verbose: Displays detailed neighbor information.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
Type: S-Static D-Dynamic O-Openflow R-Rule I-Invalid
IPv6 address Link layer VID Interface/Link ID State T Age
FE80::3470:984:D96B:10CA a036-9f8b-18ad N/A MGE0/0/0 STALE D 4175

Table of Contents

Other manuals for HPE FlexFabric 5950 Series

Related product manuals