HPE FlexFabric 5950 Series

157
Table 31 Command output
Field Description
SIP Source IP address.
SPort Source port number.
DIP Destination IP address.
DPort Destination port number.
Pro Protocol number.
Input_If
Input interface type and number.
If no interface is involved in fast forwarding, this field displays
N/A
.
If the input interface does not exist, this field displays a hyphen (-).
Output_If
Output interface type and number.
If no interface is involved in fast forwarding, this field displays
N/A
.
If the output interface does not exist, this field displays a hyphen (-).
Flg Internal tag, marking internal operation information, such as fragmentation.
Related commands
reset ip fast-forwarding cache
display ip fast-forwarding fragcache
Use display ip fast-forwarding fragcache to display fast forwarding entries for fragmented
packets.
Syntax
display ip fast-forwarding fragcache [ ip-address ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip-address: Specifies an IP address. If you do not specify an IP address, this command displays fast
forwarding entries for all fragmented packets.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays fast forwarding entries for fragmented packets on all member
devices.
Examples
# Display fast forwarding entries about all fragmented packets.
<Sysname> display ip fast-forwarding fragcache
Total number of fragment fast-forwarding entries: 1
SIP SPort DIP DPort Pro Input_If ID
7.0.0.13 68 8.0.0.1 67 17 HGE1/0/3 2