171
Syntax
display rawip verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pcb pcb-index: Displays detailed RawIP connection information for the specified PCB. The
pcb-index argument specifies the index of the PCB. The index is a hexadecimal string in the range of
1 to ffffffffffffffff.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays detailed information about RawIP connections for all member
devices.
Usage guidelines
The detailed information includes socket creator, state, option, type, protocol number, and the source
and destination IP addresses of RawIP connections.
Examples
# Display detailed information about RawIP connections.
<Sysname> display rawip verbose
Total RawIP socket number: 1
Location: slot: 6
Creator: ping[320]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/drop/state): 0 / 9216 / 1 / 0 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 3
Protocol: 1
Connection info: src = 0.0.0.0, dst = 0.0.0.0
Inpcb flags: N/A
Inpcb extflag: INP_EXTRCVICMPERR INP_EXTFILTER
Inpcb vflag: INP_IPV4
TTL: 255(minimum TTL: 0)
Send VRF: 0xffff
Receive VRF: 0xffff
Table 37 Command output
Field Description
Total RawIP socket number Total number of RawIP sockets.
Creator
Name of the operation that created the socket. The number in
brackets is the process number of the creator.
State State of the socket.
To Next Page
Loading...
Need help?
General