HPE FlexFabric 5950 Series

91
dhcp relay server-address
remote-server algorithm
dhcp-server timeout
Use dhcp-server timeout to set the DHCP server response timeout time for DHCP server
switchover.
Use undo dhcp-server timeout to restore the default.
Syntax
dhcp-server timeout time
undo dhcp-server timeout
Default
The DHCP server response timeout time is 30 seconds.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
time: Specifies the DHCP server response timeout time in the range of 30 to 65535 seconds.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the DHCP server response timeout time to 60 seconds for DHCP server switchover in DHCP
address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] dhcp-server timeout 60
Related commands
remote-server algorithm
dhcp smart-relay enable
Use dhcp smart-relay enable to enable the DHCP smart relay feature.
Use undo dhcp smart-relay enable to disable the DHCP smart relay feature.
Syntax
dhcp smart-relay enable
undo dhcp smart-relay enable
Default
The DHCP smart relay feature is disabled.
Views
System view