60
Field Description
DHCPNAK.
• BOOTPREPLY.
This field is not displayed if statistics about a specific address pool are
displayed.
Bad Messages
Number of bad messages. This field is not displayed if you display
statistics for a specific address pool.
Related commands
reset dhcp server statistics
dns-list
Use dns-list to specify DNS server addresses in a DHCP address pool.
Use undo dns-list to remove DNS server addresses from a DHCP address pool.
Syntax
dns-list ip-address&<1-8>
undo dns-list [ ip-address&<1-8> ]
Default
No DNS server address is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address&<1-8>: Specifies a space-separated list of up to eight DNS servers.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
If you do not specify any parameters, the undo dns-list command deletes all DNS server addresses
in the DHCP address pool.
Examples
# Specify DNS server address 10.1.1.254 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] dns-list 10.1.1.254
Related commands
display dhcp server pool
domain-name
Use domain-name to specify a domain name in a DHCP address pool.
Use undo domain-name to restore the default.
To Next Page
Loading...
