159
Syntax
ip fast-forwarding load-sharing
undo ip fast-forwarding load-sharing
Default
Fast forwarding load sharing is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Fast forwarding load sharing enables the device to load share packets of the same flow. This feature
identifies a data flow by using the five-tuple (source IP, source port, destination IP, destination port,
and protocol).
If fast forwarding load sharing is disabled, the device identifies a data flow by the five-tuple and the
input interface. No load sharing is implemented.
Examples
# Enable fast forwarding load sharing.
<Sysname> system-Views
[Sysname] ip fast-forwarding load-sharing
reset ip fast-forwarding cache
Use reset ip fast-forwarding cache to clear the fast forwarding table.
Syntax
reset ip fast-forwarding cache [ slot slot-number ]
Views
User view
Predefined use roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears the fast forwarding table for all member devices.
Examples
# Clear the fast forwarding table.
<Sysname> reset ip fast-forwarding cache
Related commands
display ip fast-forwarding cache
display ip fast-forwarding fragcache
To Next Page
Loading...
Need help?
General