295
Related commands
display ipv6 dhcp pool
dns-server
domain-name
sip-server
option-group
Use option-group to specify a DHCPv6 option group for a DHCPv6 address pool.
Use undo option-group to restore the default.
Syntax
option-group option-group-number
undo option-group
Default
No DHCPv6 option group is specified for a DHCPv6 address pool.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
option-group--number: Specifies a DHCPv6 option group by its number in the range of 1 to 100.
Examples
# Specify DHCPv6 option group 1 for DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] option-group 1
Related commands
display ipv6 dhcp pool
ipv6 dhcp option-group
prefix-pool
Use prefix-pool to apply a prefix pool to a DHCPv6 address pool, so the DHCPv6 server can
dynamically select a prefix from the prefix pool for a client.
Use undo prefix-pool to remove the prefix pool.
Syntax
prefix-pool prefix-pool-number [ preferred-lifetime preferred-lifetime valid-lifetime valid-lifetime ]
undo prefix-pool prefix-pool-number
Default
No prefix pool is applied to a DHCPv6 address pool.
To Next Page
Loading...
Need help?
General