338
Make sure the specified traffic processing slot is available. If the specified traffic processing slot is
unavailable, traffic on the tunnel interface cannot be forwarded, whether or not the tunnel interface is
up. Traffic on the tunnel interface will not be forwarded until the traffic processing slot becomes
available or until you respecify an available traffic processing slot.
Examples
# Specify a traffic processing slot for Tunnel 200.
<Sysname> system-view
[Sysname] interface tunnel 200
[Sysname-Tunnel200] service slot 1
shutdown
Use shutdown to shut down a tunnel interface.
Use undo shutdown to bring up a tunnel interface.
Syntax
shutdown
undo shutdown
Default
A tunnel interface is down.
Views
Tunnel interface view
Predefined user roles
network-admin
Usage guidelines
This command disconnects all links set up on the interface. Make sure you fully understand the
impact of the command on your network.
Examples
# Shut down Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] shutdown
Related commands
display interface tunnel
source
Use source to specify the source address or source interface for a tunnel interface.
Use undo source to restore the default.
Syntax
source { ipv4-address | ipv6-address | interface-type interface-number }
undo source
Default
No source address or source interface is specified for a tunnel interface.
To Next Page
Loading...
Need help?
General