72
Related commands
display dhcp server conflict
reset dhcp server expired
Use reset dhcp server expired to clear binding information about expired IP addresses.
Syntax
reset dhcp server expired [ [ ip ip-address ] [ vpn-instance vpn-instance-name ] | pool
pool-name ]
Views
User view
Predefined user roles
network-admin
Parameters
ip ip-address: Clears binding information about the specified expired IP address. If you do not
specify an IP address, this command clears binding information about all expired IP addresses.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
clears lease expiration information about IP addresses for the public network.
pool pool-name: Clears binding information about the expired IP addresses in the specified address
pool. The pool name is a case-insensitive string of 1 to 63 characters. If you do not specify an
address pool, this command clears binding information about expired IP addresses in all address
pools.
Examples
# Clear binding information about all expired IP addresses.
<Sysname> reset dhcp server expired
Related commands
display dhcp server expired
reset dhcp server ip-in-use
Use reset dhcp server ip-in-use to clear binding information about assigned IP addresses.
Syntax
reset dhcp server ip-in-use [ [ ip ip-address ] [ vpn-instance vpn-instance-name ] | pool
pool-name ]
Views
User view
Predefined user roles
network-admin
Parameters
ip ip-address: Clears binding information about the specified assigned IP address. If you do not
specify an IP address, this command clears binding information about all assigned IP addresses.
To Next Page
Loading...
