HPE FlexFabric 5950 Series Command Reference

225
Field Description
• IN6P_RTHDR—Receives the routing extension header.
• IN6P_RTHDRDSTOPTS—Receives the destination options
extension header preceding the routing extension header.
• IN6P_TCLASS—Receives the traffic class of the packet.
• IN6P_AUTOFLOWLABEL—Attaches a flow label automatically.
• IN6P_RFC2292—Uses the API specified in RFC 2292.
• IN6P_MTU—Discovers differences in the MTU size of every link
along a given data path. TCP does not support this flag.
• INP_RCVMACADDR—Receives the MAC address of the frame.
• INP_SYNCPCB—Waits until Internet PCB is synchronized.
• N/A—None of the above flags.
Inpcb extflag
Extension flags in the Internet PCB:
• INP_EXTRCVPVCIDX—Records the PVC index of the received
packet.
• INP_RCVPWID—Records the PW ID of the received packet.
• N/A—None of the above flags.
Inpcb vflag
IP version flags in the Internet PCB:
• INP_IPV4—IPv4 protocol.
• INP_IPV6—IPv6 protocol.
• INP_IPV6PROTO—Creates an Internet PCB based on IPv6
protocol.
• INP_TIMEWAIT—In TIMEWAIT state.
• INP_ONESBCAST—Sends broadcast packets.
• INP_DROPPED—Protocol dropped flag.
• INP_SOCKREF—Strong socket reference.
• INP_DONTBLOCK—Do not block synchronization of the Internet
PCB.
• N/A—None of the above flags.
Hop limit Hop limit in the Internet PCB.
Send VRF Sent instances.
Receive VRF Received instances.
ipv6 address
Use ipv6 address to configure an IPv6 global unicast address for an interface.
Use undo ipv6 address to delete an IPv6 global unicast address of the interface.
Syntax
ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length }
undo ipv6 address [ ipv6-address prefix-length | ipv6-address/prefix-length ]
Default
No IPv6 global unicast address is configured for an interface.
Views
Interface view
Predefined user roles
network-admin

HPE FlexFabric 5950 Series Specifications

General

Brand	HPE
Model	FlexFabric 5950 Series
Category	Switch
Language	English