41
Parameters
option-group-number: Assigns a number to the DHCP option group, in the range of 1 to 32768.
Examples
# Create DHCP option group 1 and enter DHCP option group view.
<Sysname> system-view
[Sysname] dhcp option-group 1
[Sysname-dhcp-option-group-1]
Related commands
class option-group
option
dhcp policy
Use dhcp policy to create a DHCP policy and enter its view, or enter the view of an existing DHCP
policy.
Use undo dhcp policy to delete a DHCP policy.
Syntax
dhcp policy policy-name
undo dhcp policy policy-name
Default
No DHCP policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Assigns a name to the DHCP policy. The policy name is a case-insensitive string of 1 to
63 characters.
Usage guidelines
In DHCP policy view, you can specify address pools for different user classes. Clients matching a
user class will obtain IP addresses and other parameters from the specified address pool.
For a DHCP policy to take effect, you must apply it to an interface.
Examples
# Create DHCP policy test and enter its view.
<Sysname> system-view
[Sysname] dhcp policy test
[Sysname-dhcp-policy-test]
Related commands
class ip-pool
default ip-pool
dhcp apply-policy
dhcp class
To Next Page
Loading...
Need help?
General