HPE FlexFabric 5950 Series Command Reference

73
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
clears binding information for the public network.
pool pool-name: Clears binding information about assigned IP addresses in the specified address
pool. The pool name is a case-insensitive string of 1 to 63 characters. If you do not specify an
address pool, this command clears binding information about assigned IP addresses in all address
pools.
Usage guidelines
If you use this command to clear information about an assigned static binding, the static binding
becomes a free static binding.
Examples
# Clear binding information about IP address 10.110.1.1.
<Sysname> reset dhcp server ip-in-use ip 10.110.1.1
Related commands
display dhcp server ip-in-use
reset dhcp server statistics
Use reset dhcp server statistics to clear DHCP server statistics.
Syntax
reset dhcp server statistics [ vpn-instance vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
clears DHCP server statistics for the public network.
Examples
# Clear DHCP server statistics.
<Sysname> reset dhcp server statistics
Related commands
display dhcp server statistics
static-bind
Use static-bind to statically bind a client ID or MAC address to an IP address.
Use undo static-bind to remove a static binding.
Syntax
static-bind ip-address ip-address [ mask-length | mask mask ] { client-identifier client-identifier |
hardware-address hardware-address [ ethernet | token-ring ] }
undo static-bind ip-address ip-address

HPE FlexFabric 5950 Series Specifications

General

Brand	HPE
Model	FlexFabric 5950 Series
Category	Switch
Language	English