HPE FlexFabric 5950 Series Command Reference

173
Field Description
frame.
• INP_SNDBYLSPV—Sends through MPLS.
• INP_RECVTOS—Receives TOS of the packet. Only UDP and
RawIP support this flag.
• INP_USEICMPSRC—Uses the specified IP address as the
source IP address for outgoing ICMP packets.
• INP_SYNCPCB—Waits until Internet PCB is synchronized.
• N/A—None of the above flags.
Inpcb extflag
Extension flags in the Internet PCB:
• INP_EXTRCVPVCIDX—Records the PVC index of the received
packet.
• INP_RCVPWID—Records the PW ID of the received packet.
• INP_EXTRCVICMPERR—Receives an ICMP error packet.
• INP_EXTFILTER—Filters the contents in the received packet.
• N/A—None of the above flags.
Inpcb vflag
IP version flags in the Internet PCB:
• INP_IPV4—IPv4 protocol.
• INP_TIMEWAIT—In TIMEWAIT state.
• INP_ONESBCAST—Sends broadcast packets.
• INP_DROPPED—Protocol dropped flag.
• INP_SOCKREF—Strong socket reference.
• INP_DONTBLOCK—Do not block synchronization of the
Internet PCB.
• N/A—None of the above flags.
TTL TTL value in the Internet PCB.
display tcp
Use display tcp to display brief information about TCP connections.
Syntax
display tcp [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays brief information about TCP connections for all member devices.
Usage guidelines
Brief TCP connection information includes local IP address, local port number, peer IP address, peer
port number, and TCP connection state.
Examples
# Display brief information about TCP connections.
<Sysname> display tcp

HPE FlexFabric 5950 Series Specifications

General

Brand	HPE
Model	FlexFabric 5950 Series
Category	Switch
Language	English