212
Field Description
hyphen (-).
Type
Path MTU type:
• Dynamic—Dynamically negotiated.
• Static—Statically configured.
Total number of entries Total number of Path MTU entries.
Related commands
ipv6 pathmtu
reset ipv6 pathmtu
display ipv6 prefix
Use display ipv6 prefix to display information about IPv6 prefixes, including dynamic and static
prefixes.
Syntax
display ipv6 prefix [ prefix-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
prefix-number: Specifies the ID of an IPv6 prefix, in the range of 1 to 1024. If you do not specify an
IPv6 prefix ID, this command displays information about all IPv6 prefixes.
Usage guidelines
A static IPv6 prefix is configured by using the ipv6 prefix command.
Examples
# Display information about all IPv6 prefixes.
<Sysname> display ipv6 prefix
Number Prefix Type
1 1::/16 Static
2 11:77::/32 Dynamic
# Display information about the IPv6 prefix with prefix ID 1.
<Sysname> display ipv6 prefix 1
Number: 1
Type : Dynamic
Prefix: ABCD:77D8::/32
Preferred lifetime 90 sec, valid lifetime 120 sec
Table 50 Command output
Field Description
Number Prefix ID.
To Next Page
Loading...
Need help?
General