218
Related commands
reset ipv6 statistics
display ipv6 tcp
Use display ipv6 tcp to display brief information about IPv6 TCP connections.
Syntax
display ipv6 tcp [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays brief information about IPv6 TCP connections for all member
devices.
Examples
# Display brief information about IPv6 TCP connections.
<Sysname> display ipv6 tcp
*: TCP connection with authentication
LAddr->port FAddr->port State Slot PCB
*2001:2002:2003:2 3001:3002:3003:3 ESTABLISHED 1 0x000000000000c387
004:2005:2006:20 004:3005:3006:30
07:2008->1200 07:3008->1200
2001::1->23 2001::5->1284 ESTABLISHED 2 0x0000000000000008
2003::1->25 2001::2->1283 LISTEN 3 0x0000000000000009
Table 53 Command output
Field Description
* Indicates that the TCP connection uses authentication.
LAddr->port Local IPv6 address and port number.
FAddr->port Peer IPv6 address and port number.
State IPv6 TCP connection state.
PCB PCB index.
display ipv6 tcp verbose
Use display ipv6 tcp verbose to display detailed information about IPv6 TCP connections.
Syntax
display ipv6 tcp verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
To Next Page
Loading...
Need help?
General