HPE FlexFabric 5950 Series

45
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 32 characters. Its
encrypted form is a case-sensitive string of 1 to 73 characters. Do not specify this argument if a
password is not required for accessing the URL of the remote backup file.
Usage guidelines
The command automatically creates the file if you specify a nonexistent file.
With this command executed, the DHCP server backs up its bindings immediately and runs auto
backup. The server, by default, waits 300 seconds after a binding change to update the backup file.
You can use the dhcp server database update interval command to change the waiting time. If no
DHCP binding changes, the backup file is not updated.
As a best practice, back up the bindings to a remote file. If you use the local storage medium, the
frequent erasing and writing might damage the medium and then cause the DHCP server to
malfunction.
When the backup file is on a remote device, follow these restrictions and guidelines to specify the
URL, username, and password:
• If the file is on an FTP server, enter URL in the following format: ftp://server address:port/file
path, where the port number is optional.
• If the file is on a TFTP server, enter URL in the following format: tftp://server address:port/file
path, where the port number is optional.
• The username and password must be the same as those configured on the FTP server. If the
server authenticates only the username, the password can be omitted.
• If the IP address of the server is an IPv6 address, enclose the address in a pair of brackets, for
example, ftp://[1::1]/database.dhcp.
• You can also specify the DNS domain name for the server address field, for example,
ftp://company/database.dhcp.
Examples
# Configure the DHCP server to back up its bindings to file database.dhcp.
<Sysname> system-view
[Sysname] dhcp server database filename database.dhcp
# Configure the DHCP server to back up its bindings to file database.dhcp in the working directory
of the FTP server at 10.1.1.1.
<Sysname> system-view
[Sysname] dhcp server database filename url ftp://10.1.1.1/database.dhcp username 1
password simple 1
Related commands
dhcp server database update interval
dhcp server database update now
dhcp server database update stop
dhcp server database update interval
Use dhcp server database update interval to set the waiting time for the DHCP server to update
the backup file after a DHCP binding change.
Use undo dhcp server database update interval to restore the default.