83
Parameters
time: Specifies the DHCP server response timeout time in the range of 30 to 65535 seconds.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the DHCP server response timeout time to 60 seconds for DHCP server switchover on
VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] dhcp relay dhcp-server timeout 60
Related commands
dhcp relay server-address algorithm
dhcp relay gateway
Use dhcp relay gateway to specify the DHCP relay agent address to be padded to DHCP requests.
Use undo dhcp relay gateway to restore the default.
Syntax
dhcp relay gateway ip-address
undo dhcp relay gateway
Default
The primary IP address of the interface is padded to DHCP requests as the DHCP relay agent
address.
Views
Interface view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the DHCP relay agent address. It must be an IP address of the interface.
Usage guidelines
The DHCP relay agent uses the specified IP address instead of the primary IP address of the relay
interface as the DHCP relay agent address.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify 10.1.1.1 as the DHCP relay agent address to be padded to DHCP requests on
VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] dhcp relay gateway 10.1.1.1
Related commands
gateway-list
To Next Page
Loading...
Need help?
General