HPE FlexFabric 5950 Series

325
IPv6 fast forwarding commands
display ipv6 fast-forwarding aging-time
Use display ipv6 fast-forwarding aging-time to display the aging time of IPv6 fast forwarding
entries.
Syntax
display ipv6 fast-forwarding aging-time
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the aging time of IPv6 fast forwarding entries.
<Sysname> display ipv6 fast-forwarding aging-time
Aging time: 30s
Table 71 Command output
Field Description
Aging time Aging time of IPv6 fast forwarding entries, in seconds.
Related commands
ipv6 fast-forwarding aging-time
display ipv6 fast-forwarding cache
Use display ipv6 fast-forwarding cache to display IPv6 fast forwarding entries.
Syntax
display ipv6 fast-forwarding cache [ ipv6-address ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Specifies an IPv6 address. If you do not specify an IPv6 address, this command
displays all IPv6 fast forwarding entries.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 fast forwarding entries for all member devices.