240
Examples
# Specify unlimited hops in the RA messages on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ipv6 nd ra hop-limit unspecified
Related commands
ipv6 hop-limit
ipv6 nd ra interval
Use ipv6 nd ra interval to set the maximum and minimum intervals for advertising RA messages.
Use undo ipv6 nd ra interval to restore the default.
Syntax
ipv6 nd ra interval max-interval min-interval
undo ipv6 nd ra interval
Default
The maximum interval between RA messages is 600 seconds, and the minimum interval is 200
seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
max-interval: Specifies the maximum interval value in seconds, in the range of 4 to 1800.
min-interval: Specifies the minimum interval value in the range of 3 seconds to three-fourths of the
maximum interval.
Usage guidelines
The device advertises RA messages randomly between the maximum interval and the minimum
interval.
The maximum interval for sending RA messages should be less than or equal to the router lifetime in
RA messages.
Examples
# Set the maximum interval for advertising RA messages to 1000 seconds and the minimum interval
to 700 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra interval 1000 700
Related commands
ipv6 nd ra router-lifetime
ipv6 nd ra no-advlinkmtu
Use ipv6 nd ra no-advlinkmtu to turn off the MTU option in RA messages.
To Next Page
Loading...
Need help?
General