HPE FlexFabric 5950 Series Command Reference

154
Examples
# Display the load sharing path selected for the flow with the following attributes: ingress port
HundredGigE 1/0/3, destination IP address 10.110.0.2, source IP address 10.100.0.2, IP protocol
number 153, destination port number 2000, source port number 2000.
<Sysname> display ip load-sharing path ingress-port hundredgige 1/0/3 packet-format ipv4oe
destination-ip 10.110.0.2 source-ip 10.100.0.2 ip-pro 153 dest-port 2000 src-port 2000
Load-sharing algorithm: 0
Load-sharing options: ingress-port | dest-ip | src-ip | ip-pro | dest-port | src-port
Load-sharing parameters:
Missing configured are set to 0.
ingress-port: HundredGigE1/0/3
packet-format: IPv4oE
dest-ip: 10.110.0.2
src-ip: 10.100.0.2
ip-pro: 153
dest-port: 2000
src-port: 2000
Path selected: 20.0.0.2(interface HundredGigE1/0/3)
Table 30 Command output
Field Description
Load-sharing algorithm Load sharing algorithm ID.
Load-sharing options Load sharing options specified by the
ip load-sharing mode
command.
Load-sharing parameters
Load sharing parameters that you specify for the
display ip
load-sharing path
command.
Missing configured are set to 0. Values of the unconfigured parameters are set to 0.
ingress-port Ingress port of the packet.
packet-format Packet encapsulation format.
dest-ip Destination IP address of the packet.
src-ip Source IP address of the packet.
ip-pro IP protocol number.
dest-port Destination port number.
src-port: Source port number.
Path selected
Selected path information, including the IPv4 or IPv6 address of the next
hop and the egress port.
Related commands
ip load-sharing mode
ip load-sharing mode
Use ip load-sharing mode to configure the load sharing mode.
Use undo ip load-sharing mode to restore the default.

HPE FlexFabric 5950 Series Specifications

General

Brand	HPE
Model	FlexFabric 5950 Series
Category	Switch
Language	English