31
Predefined user roles
network-admin
Parameters
dscp-value: Specifies the DSCP value for DHCP packets, in the range of 0 to 63.
Usage guidelines
The DSCP value of a packet specifies the priority level of the packet and affects the transmission
priority of the packet. A bigger DSCP value represents a higher priority.
Examples
# Set the DSCP value to 30 for DHCP packets sent by the DHCP server or the DHCP relay agent.
<Sysname> system-view
[Sysname] dhcp dscp 30
dhcp enable
Use dhcp enable to enable DHCP.
Use undo dhcp enable to disable DHCP.
Syntax
dhcp enable
undo dhcp enable
Default
DHCP is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
DHCP related configuration takes effect only after you enable DHCP.
Enable DHCP before you configure the DHCP server or relay agent.
Examples
# Enable DHCP.
<Sysname> system-view
[Sysname] dhcp enable
dhcp log enable
Use dhcp log enable to enable DHCP server logging.
Use undo dhcp log enable to disable DHCP server logging.
Syntax
dhcp log enable
undo dhcp log enable
To Next Page
Loading...
Need help?
General